Page Comparison

\\

{on-this-page}


h2. How should I label piers for a wall with openings?

*ANSWER:* A suggested pier labeling scheme for walls with openings is given in Figure 1:

\\

!Figure 1.png|align=center,border=0!

{center-text}Figure 1 - Pier labeling scheme{center-text}

* Additional information is available through Help > Documentation > Shear Wall Design > General Design Information.

{hidden-content}
*Related Incident:*
* {incident:no=47453|comment=Etabs query}
{hidden-content}


h2. How are surface loading conditions applied to an area?

*Answer:* Loading conditions may be applied as follows:

# Mesh the area at appropriate locations and intervals using the options available through Edit > Mesh Areas.
\\
\\
# *Concentrated loads* -- Apply concentrated moments and point loads to any node location by selecting Assign > Point Load.
\\
\\
# *Line loads* -- For linear distributed loading, define a frame object with negligible structural properties, then draw these frames where line loads are to be applied. Draw line loads on the frame objects by selecting Assign > Frame loads > Distributed, then scale their magnitude according to tributary allocation.
\\
\\
# *Area loads* -- Similarly, apply area loads by selecting Assign > Area loads > [Uniform (Shell)|tp:Options for applying area loads] _or_ [Uniform to Frame (Shell)|tp:Options for applying area loads].

{hidden-content}
*Related Incident:*
* {incident:no=48507|comment=wall loadings in etabs}
{hidden-content}