You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 14
Next »
Conversion needed
In order to continue using this Live Template macro, a
Server-to-Cloud conversion will be required. Click on Bulk conversion tool action link below
to easily convert all your migrated content or do it individually
using Convert this live template macro only.
Within 2D views, only entities within the 2D View Cutting Planes tolerance are displayed. If objects which should be displayed are not shown, tolerance may be increased through Options > Dimensions/Tolerances > 2D View Cutting Planes +/-.
The blue up and down arrows change the elevation at which the 2D view is taken, as shown in Figure 1:
Figure 1 - Adjust view elevation