/
Generating response-spectrum curves

Generating response-spectrum curves


Using SAP2000, response-spectrum curves may be generated from a user-defined time-history record through the following process:

  • Define the time-history function through Define > Functions > Time History Menu.
  • Define the time-history load case through Define > Load Cases > Add New Load Case.
  • Select a fixed joint, then display the ground-motion response-spectrum curves for that joint by selecting Display > Show Response Curves, as shown in Figure 1:


Figure 1 - Response-spectrum curves

See Also

Related content

Response-spectrum analysis FAQ
Response-spectrum analysis FAQ
More like this
Archiving analysis models
Archiving analysis models
More like this
Time-history analysis first steps
Time-history analysis first steps
More like this
Acceleration load in arbitrary direction
Acceleration load in arbitrary direction
More like this
Obtain results for individual stages of a staged-construction load case
Obtain results for individual stages of a staged-construction load case
More like this
Piping Stress Integration with SAP2000 Structural Analysis Models
Piping Stress Integration with SAP2000 Structural Analysis Models
More like this