/
Create circular openings

Create circular openings

Owned by Ondrej
Last updated: Sep 25, 2024
1 min read

This tutorial is for SAP2000, but similar concept applies also to CSiBridge.

 

Guidelines for creating a circular opening and meshing the surrounding shell object are outlined in this tutorial. While demonstration follows the modeling of a circular opening, the concept and procedures also apply to openings of other shapes.

Report preview

Attachments

Metadata

  • Name: Create circular openings

  • Description: Circular openings may be created within area objects, and the surrounding mesh may be improved.

  • Program: SAP2000

  • Program Version: all

  • Model ID: na

Related content

Building models manually via the commands on the Advanced Tab
Building models manually via the commands on the Advanced Tab
Tutorials
More like this
Layout-line geometry
Layout-line geometry
Tutorials
More like this
Manual modeling of wall-type bents
Manual modeling of wall-type bents
Tutorials
More like this
Bridge design
Bridge design
Technical Knowledge Base
More like this
Concrete box-girder bridge model
Concrete box-girder bridge model
Tutorials
More like this
Cable-stayed bridge
Cable-stayed bridge
Tutorials
More like this

General-Topics | CSiBridge CSiCOL CSiPlant ETABS PERFORM-3D SAFE SAP2000 | Tutorials Test-Problems Documentation Licensing

Copyright © 2025 Computers and Structures, Inc. All rights reserved.